Strawberry towers
The goal this winter: strawberries most weeks from December to March, and at least one for Christmas.
The short version
Eight 3D-printed hydroponic towers growing Malling Ace and Malling Champion strawberries. They started in a windowless garage and now live in a garden greenhouse.
At first, feeding them meant testing and adjusting the water by hand, up to four hours a day. Now the system checks the water, doses the nutrients and tops itself up. It saves me around fourteen hours a week.
The first towers were Hoocho's 3D-printed design. His videos are what got me into 3D printing.
The videos, in order
I Accidentally Built an Automated Strawberry Farm in My Garden · 24 October 2026
Can I Grow Strawberries for Christmas in a UK Greenhouse? · 13 November 2026
How it got here
- Spring 2025First towers planted in the garage. Shop-quality berries for a few weeks, then the leaves started telling me I was doing it wrong.
- Summer 2025Testing pH and nutrients by hand for eight towers. The towers, hung with lights, got top-heavy and fell over like dominoes.
- Autumn 2025Nearly gave up. Moved the towers outside, left them mostly alone, and they recovered and fruited again in October.
- Winter 2025Back in the garage, all feeding from one shared reservoir. You can't automate eight buckets, but you can automate one tank.
- March 2026Strawberries picked in a garage with no windows, under grow lights only.
- April 2026Everything moved into the timber and polycarbonate greenhouse I'd been building in the garden since February.
- August 2026Automatic top-ups meant two weeks away on holiday. Came back to healthy plants and runners everywhere.
- November 2026The winter reset: four towers out, runners replanted, two new square towers in.
What went wrong (so far)
- Lights hung from the towers made them top-heavy. They fell over more than once.
- Hobby pH and EC probes interfered with each other in the same water. An imported lab-grade EC probe failed. Industrial SenseCAP probes have worked since.
- Pushing the nutrient strength up to EC 2.2 hurt the plants. 1.2 to 1.6 works.
- Forgot the phosphate in my nutrient mix for a while. The older leaves still show it.
- Round towers too close together, and the side by the wall was hard to reach and light.
- No airflow in the garage meant spider mites. Mildew is the new worry in the greenhouse.
What it runs on
| Part | What I use |
|---|---|
| pH and EC probes | SenseCAP industrial probes |
| Dosing | Raspberry Pi 5 running Mycodo, with peristaltic pumps |
| Water top-up | ESP32 running ESPHome, level sensors and a solenoid valve, RO water |
| Grow lights | Mainly Spider Farmer and Barrina |
| Nutrient strength | EC 1.2 to 1.6 |
| pH | 5.8 to 6.0 |
The new towers are moving to a much simpler set-up. See the simpler automation →
Follow the build
New videos and build updates go out on YouTube first. Email updates are coming soon.